The Magic Module (ELK-MM220) is a two digital input, two form C relay output programmable controller. It may be used as a stand alone field programmable controller in a vast array of applications from timers, single zone security system, pulse stretcher, simple process controllers, etc.
The MM220 comes factory pre-programmed as a single zone security system and can be re-programmed by using a personal computer. The MM220 program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory).
Programming requires the following items:
- ELK-MM443 4 Input/4 Output Magic Module
- Modules can be found on ELK's website here: www.elkproducts.com/downloads
- Features
- Two Digital Inputs
- Two Relay Outputs (jumper programmable "transistor open collector" output on relay 2)
- 4096 program bytes using SIMPLE programming language
- 4 general purpose Counters, range 0 to 255 counts
- 4 general purpose Timers, range 1/10 second to over 255 hours
- Program stored in non-volatile EEProm memory
- Surface Mount ABS Enclosure with Snap-On Cover
- Lifetime Limited Warranty
- Specifications:
- Inputs: 2 Digital inputs, Jumper programmable for +12v or pull to ground input level. 0 to 2 volts is low, 2 to 15 is Hi.
- Outputs: 2 Form "C" Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; One relay output may be configured as open collector transistor output - 100 ma. Max.
- Operating Voltage: 9.5-15 Volts DC
- Current Draw: 10 ma. Nominal, 70 ma. Maximum with both relays active.
- Enclosure: Black ABS Plastic: 4.5" x 3" x 1.2"
Product Code: ELK-MM220
