The FA212 will act as 2 separate transmitters. Pressing either button by itself will cause the transmitter to activate the point ID assigned (Base ID). Pressing both buttons simultaneously activates the Base ID + 1. Activation signals are transmitted multiple times, and are indicated by the blinking transmission indicator LED. Messages will be interrupted if one type is being sent and the other type is activated. E.g., if one button is pressed the transmitter will send the Base ID. If both buttons are then pressed simultaneously while the red LED is still blinking, the
transmitter will stop sending the Base ID and start sending the Base ID + 1.
Note: The FA212 does not send restoral signals ; i.e., it only transmits activations. The receiver should, therefore, be programmed for momentary outputs.
Picture for illustration only. Chain not included.
New with one year warranty
Product Code: FA212
