New Bosch ZX938Z ceiling mount motion detector. Contains built in Poppit for use on Radionics/Bosch zonex systems.
1.0 Specifications
•
Input Power:
Connect to the Zonex Bus of the control panel.
•
Current Draw:
Less than 600 micro-amps. Four milli-amps when in Walk Test Mode (LED on).
•
Standby Power:
There is no internal standby battery. Connect to DC power sources capable of supplying standby power if
primary power fails. 500 micro-amp-hours required for each hour of standby time needed.
Four hours minimum is required for
UL Listed Requirements.
•
Coverage:
360° by 60 ft. (18.3 m) diameter coverage when mounted on 8 to 18 ft. (2.4 to 5.5 m) high ceilings. Pattern
consists of 64 zones grouped into 16 barriers, with one additional zone looking straight down from the unit (sabotage). Each
barrier is 30 ft. (9.2 m) long and 4.4 ft. (1.3 m) wide at 30 ft. (9.2 m). Choice of two optical modules depending on ceiling
height.
Note:
For UL Listed Requirements, the coverage is 360° by 54 ft. (16.5 m) when mounted from 10 to 13 ft. (3.1 to 4.0 m) using the AR8
-13
Array and when mounted from 15 to 18 ft. (4.6 to 5.5 m) using the AR13-18 Array
.
•
Sensitivity:
Standard, Intermediate, or High.
•
Tamper:
A tamper condition is signaled through the Zonex Bus and displayed at the keypads when the cover is removed.
Note
: After the cover has been installed and twisted into place, the entire assembly can be secured together using the (two)
supplied anti-vandal screws.
•
Temperature:
The storage and operating range is -20° F to +120° F (-29° C to +50° C).
For UL Listed Requirements, the range
is +32° F to +120° F (0° C to +50° C).
•
Requirements:
Compatible control panel with POPEX module installed.
One year warranty.
Product Code: ZX938Z
